YES IT IS TRUE I NEED A SET OF 1.18 HELI CUT 12 DEGREE CASALE SPLIT CASE V-DRIVE GEARS.
CONTACT ME AT
corvette73@prodigy.net
or call me ar 707 246 2405
Rich
Laid Back Boaters
Jet boats, v-drives, outdrives or outboards....doesn't matter what you have, we're all here to share info and have a good time.
| Welcome | ||
|---|---|---|
| Welcome to the Laid Back Boaters message board When you register, be sure to check the proper box for your age! As a guest, you will not be able to see all the content of this message board. After registering you will have access to all forums, post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, join our community today! |
||
WTB 12 DEG 1.18 V-DRIVE GEARS
5 posts
• Page 1 of 1
WTB 12 DEG 1.18 V-DRIVE GEARS
by Sanger-Rich » June 4th, 2011, 11:32 am
- Sanger-Rich
- Posts: 26
- Laid Back Bucks: 1902
- Joined: October 4th, 2008, 7:39 pm
Re: WTB 12 DEG 1.18 V-DRIVE GEARS
by flatbroke » June 4th, 2011, 3:09 pm
That is the gears I run and love them, but mine is a 10* and wouldn't think of selling them. You might want to post it here http://www.v-driveboat.com/forumdisplay.php?16-Classifieds as these guys have a lot of parts that they will sell you just have to ask for it.
The food stamp program is pleased to be distributing the greatest amount of food stamps ever.
The National Park Service ask us to "Please Do Not Feed the Animals" because the animals may grow dependent and not learn to take care of themselves.
The National Park Service ask us to "Please Do Not Feed the Animals" because the animals may grow dependent and not learn to take care of themselves.
-
flatbroke - Posts: 1632
- Laid Back Bucks: 982545
- Joined: April 27th, 2009, 8:10 pm
- Location: Marysville, CA.
Re: WTB 12 DEG 1.18 V-DRIVE GEARS
by Wayne Zighter » June 7th, 2011, 8:50 pm
what prop are you guys running with the 18% gears?
AKA "SisQ Kid", Feel free to question my actions, but don't ever try to dictate them
-
Wayne Zighter - Posts: 411
- Laid Back Bucks: 559574
- Joined: November 19th, 2010, 6:11 am
- Location: Siskiyou & San Diego
Re: WTB 12 DEG 1.18 V-DRIVE GEARS
by sanger448 » June 20th, 2011, 7:49 am
Wayne Zighter wrote:what prop are you guys running with the 18% gears?
Hi Tim: I run an 11.5 X 15 two blade at this time. You need to experiment with several diameters and pitches to see which one allows your motor to run in the power curve at WOT. With this prop and my heavy Sanger the motor tops out at 6300 rpm. I am probably going to change over to a three blade if I can ever find one to eliminate some lower end vibrations. Will lose alittle at top end but will work better for my type of drivng..
- sanger448
- Posts: 293
- Laid Back Bucks: 92180
- Joined: March 4th, 2010, 8:48 pm
- Location: Jacksonville, OR
Re: WTB 12 DEG 1.18 V-DRIVE GEARS
by flatbroke » June 20th, 2011, 7:53 pm
I'm running a Precision 3 blade 11.5 X 14 and yes I give up a little on the top end but I can still go faster than the front seat passenger can handle. With the present configuration I think about 5600 RPM but it has been so long since I've been that fast I don't remember for sure.
The food stamp program is pleased to be distributing the greatest amount of food stamps ever.
The National Park Service ask us to "Please Do Not Feed the Animals" because the animals may grow dependent and not learn to take care of themselves.
The National Park Service ask us to "Please Do Not Feed the Animals" because the animals may grow dependent and not learn to take care of themselves.
-
flatbroke - Posts: 1632
- Laid Back Bucks: 982545
- Joined: April 27th, 2009, 8:10 pm
- Location: Marysville, CA.
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
