Laid Back Boaters

looks great! but you need a bigger book shelf
Looks like a few Lee Child books on that shelf too. I wish I could remember which ones I haven't read yet. I made a list but I think it got tossed or I just don't remember where I put it

Fleet it is Jeff over in Rough in Ready, remember me???
My adult son and I are embarking on a jet project (check it out in here) and we are going to need some coating done this coming winter, are you still doing this?

H i Jeff,

Still playing with it. Let me know what you want to do.

Tim
530 320-0549

Tim I will call you when we have our "direction" sorted out. Waiting for the word ($) on the heads to come back, then find out where I am with the short block.
I suspect we will be looking for PC around Feb. I know we are going to want to do the intake, and we will have some other pieces too. Need to decide on colors.

fleet, how long do you think it would take to bead blast 4 wheels and powder coat? I need to get 4 new tires and I figure since they need to come off the wheels, it would be a good time to do it. Any deal on tires up your way? 205/70R14's for 4
what color powder's do you have? and, how long does it take to get powder delivered after ordering? I'm pretty sure I have nothing to do this coming Sunday

Blast and coat would be at least 4 hours. Colors are black, wrinkle black, red , yellow, green, brown, silver blue and white

http://www.propowdersupply.com/catalog/powder

Two days max to order and receive powder

the Black Chrome color is wicked kewl......

ok, pm me an address where to have it sent to

I don't know if the colors I chose are compatible ie: the patented ultimate chrome for the base coat and then solar rain, deep red transparent and then crystal clear super durable clear coat to go on top?
A couple say they are polyester and a couple say they are a polyurethane?

875 Marguerite Mine Rd
Auburn, Ca 95603

back to the drawing board. I spoke with someone at Powder by the Pound and what I want to do with the valve covers and scoop is a real pain in the arse. He said using a polyester base then a polyurethane base can be done but it's pretty tricky and has to been done perfectly or it'll come out like doodoo. On top of that, once that part is done, the clear is a polyester base to go over the polyurethane....I've got a headache just typing this. Anyway, they will be getting what's called Dormant Red that will be a lot easier to use and will come out much better than the 3 coat deal.
Here is what the blue looks like-


He said that when you spray the color on it's very transparent and a little hard to tell it's even colored. After it's clear coated, it comes out like the above picture and has a really small metal flake look to it. He's going to give me a call when it arrives. Now all that's needed is a large enough oven to fit my scoop.

here it is in green showing the metal flake look-

Parts for a new project

I noticed you have 6 of every color except white, black and brown. Did you lose some?

Cas wrote:back to the drawing board. I spoke with someone at Powder by the Pound and what I want to do with the valve covers and scoop is a real pain in the arse. He said using a polyester base then a polyurethane base can be done but it's pretty tricky and has to been done perfectly or it'll come out like doodoo. On top of that, once that part is done, the clear is a polyester base to go over the polyurethane....I've got a headache just typing this. Anyway, they will be getting what's called Dormant Red that will be a lot easier to use and will come out much better than the 3 coat deal.
Here is what the blue looks like-


He said that when you spray the color on it's very transparent and a little hard to tell it's even colored. After it's clear coated, it comes out like the above picture and has a really small metal flake look to it. He's going to give me a call when it arrives. Now all that's needed is a large enough oven to fit my scoop.
]

Hey steve you have seen my motor that is three coats 1st was chrome silver,2nd and 3rd were the candy orange thats why its so dark