I am thinking my new motor with large lift cam might want to breathe a little better. I am currently running 2-7/8" exhaust, and would like to upgrade it to 3-1/2" If you have the risers in 3-1/2", or exhaust tips in 3-1/2", I am looking for them.
**EDIT After looking I am actually running the 2-7/8" stuff, and for some reason I thought that the ones I wanted were the 4" when in reality, they should have been 3-1/2"
Laid Back Boaters
Jet boats, v-drives, outdrives or outboards....doesn't matter what you have, we're all here to share info and have a good time.
| Welcome | ||
|---|---|---|
| Welcome to the Laid Back Boaters message board When you register, be sure to check the proper box for your age! As a guest, you will not be able to see all the content of this message board. After registering you will have access to all forums, post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, join our community today! |
||
3-1/2" exhaust pieces
6 posts
• Page 1 of 1
3-1/2" exhaust pieces
by 74konaproject » September 20th, 2010, 5:52 am
...that's why we don't have nice things...
- 74konaproject
- Posts: 380
- Laid Back Bucks: 220387
- Joined: March 15th, 2009, 12:29 pm
- Location: Eastern Kansas
Re: 3-1/2" exhaust pieces
by motorhead » September 20th, 2010, 11:30 pm
I'm putting O/Ts back on my boat. Let me get it out on the water and try it out. If everything works out ok, I send you a PM and we can talk.
This vehicle makes frequent roosts!
-
motorhead - Posts: 326
- Laid Back Bucks: 76556
- Joined: September 6th, 2008, 5:11 pm
- Location: SoCal
- Highscores: 3
Re: 3-1/2" exhaust pieces
by 74konaproject » September 21st, 2010, 7:57 am
Sounds good. I am in no rush, the summer is basically over here, so I won't be running much until next summer.
...that's why we don't have nice things...
- 74konaproject
- Posts: 380
- Laid Back Bucks: 220387
- Joined: March 15th, 2009, 12:29 pm
- Location: Eastern Kansas
Re: 3-1/2" exhaust pieces
by motorhead » September 22nd, 2010, 9:47 pm
Good then. I have the risers, tips, and hoses. Can't guarantee the hoses are long enough for you though.
This vehicle makes frequent roosts!
-
motorhead - Posts: 326
- Laid Back Bucks: 76556
- Joined: September 6th, 2008, 5:11 pm
- Location: SoCal
- Highscores: 3
Re: 3-1/2" exhaust pieces
by 74konaproject » September 23rd, 2010, 10:08 am
How much are you wanting for all that?
Do you have pics of the risers so I can make sure that they'll bolt up to my logs?
Do you have pics of the risers so I can make sure that they'll bolt up to my logs?
...that's why we don't have nice things...
- 74konaproject
- Posts: 380
- Laid Back Bucks: 220387
- Joined: March 15th, 2009, 12:29 pm
- Location: Eastern Kansas
Re: 3-1/2" exhaust pieces
by motorhead » September 23rd, 2010, 8:29 pm
I'll try to take some pix and send them to you tomorrow.
This vehicle makes frequent roosts!
-
motorhead - Posts: 326
- Laid Back Bucks: 76556
- Joined: September 6th, 2008, 5:11 pm
- Location: SoCal
- Highscores: 3
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests
